Table of Contents
Advertisement
Operation
Operating Instructions 610/630 - 00.0 - 05/2014
Fig. 11: Threading the looper thread – Part 2
(8) – Looper hole
(9) – Looper hole
(10) – Thread down-holder
9. Remove the cover plates to the right and left of the throat plate.
10. Lift the thread down-holder (10) from its latching.
11. Insert the thread from the right to the left through the holes
(12) and (11) of the looper thread guide.
12. Turn the handwheel until the looper hole (9) is accessible.
13. Insert the thread from right to left through the looper hole (9).
14. Insert the thread from left to right through the looper hole (8)
and pull out approx. 3 cm of thread.
15. Press down the thread down-holder (10) and engage.
16. Fit the cover plates to the right and left of the throat plate.
(11) – Hole, looper thread guide
(12) – Hole, looper thread guide
31
Advertisement
Table of Contents
