Threading The Needle Thread - DURKOPP ADLER 610 Operating Instructions Manual

26

5.5 Threading the needle thread

WARNING
Risk of injury from the needle point and moving
parts.
Switch off the sewing machine before replacing
the needle.
Fig. 5: Fitting the needle thread reel
(1) – Guide on unwinding bracket
1. Fit the thread reel on the left plate of the reel stand (2).
2. Insert the thread from the back to the front through the first
hole and then in a wavelike manner through the next two holes
of the guide on the unwinding bracket (1).
Important: The unwinding bracket (1) must be parallel
to the reel stand (2).
(2) – Reel stand
Operating Instructions 610/630 - 00.0 - 05/2014
Operation