24
5.4
Threading the looper thread
WARNING
Risk of injury from moving parts.
Switch the sewing machine off
before threading.
Fig. 8: Fitting the looper thread reel
(1) - Guide on unwinding bracket
1. Fit the thread reel on the right plate of the reel stand (2).
2. Insert the thread from the back to the front through the first
hole and then in a wavelike manner through the next two holes
of the guide on the unwinding bracket (1).
Important: The unwinding bracket (1) must be parallel
to the reel stand (2).
Fig. 9: Threading procedure for looper thread - General overview
(2) - Reel stand
Operating manual 171/173 Version 01.0 - 01/2016
Operation
①
②