96
Function
Mirror programmed side to other side AUTO mode
Program other side
Finish
By pressing the Abort button, the selection window is closed
and the AUTO user interface is displayed again. All data
input is then deleted!
Adjustable parameters
The following table describes the adjustable parameters in the
programming mode PROGRAMMING.
Icons
PROGRAMMING mode
AUTO mode
Meaning
Input program names.
In the PROGRAMMING mode, only
one display. The next free channel is
automatically assigned to a new program.
Select right or left sewing part
Set the sewing material size,
Other program parameters in the
programming mode PROGRAMMING,
pg. 100.
Set fullness in the current segment,
pg. 99
Set needle thread tension in the current
segment
Operating Instructions 610/630 - 00.0 - 05/2014
Software settings
Interface
pg. 98