Software settings
Operating Instructions 610/630 - 00.0 - 05/2014
• Service mode SERVICE
In service mode, there are functions that can be used
for servicing work.
Service mode is password-protected, in order to avoid
unintentionally making incorrect machine settings.
7.4 General operation of the controller
Operation takes place via the control panel. All functions
and inputs are initiated by touch.
In the individual operating modes, numerical values can be
input for the individual parameters and text can be input for
the program names.
The inputs are made on separate user interfaces.
7.4.1
Inputting numerical values
Fig. 33: Inputting numerical values
The user interface for inputting numerical values comprises
the following elements:
69