Table of Contents
Advertisement
Operation
Operating Instructions 610/630 - 00.0 - 05/2014
Use only DA 10 lubricant or an equivalent oil conforming to the
following specifications to lubricate the special sewing machine:
• Viscosity at 40°C: 10 mm²/s
• Flash point: 150°C
DA 10 can be obtained from DÜRKOPP ADLER AG sales offices
under the following part no.:
Container size
250 ml container
1 L container
2 L container
5 L container
Maintenance Explanations
Machine
upper section
• Remove any
Points that need to be cleaned
sewing dust
particularly thoroughly:
and thread
• Area under the throat plate
remains (e.g.
• Area around the looper
using the
• Area around the thread pick-up disk
compressed-
• Thread cutter
air pistol)
• Area around the needle
Attention
Hold the compressed-air pistol in such
a way that the sewing dust is not blown
into the oil pan.
Sewing drive
Clean the
Clean the sewing dust and thread
motor fan
residue from the air inlet openings.
sieve
(e.g. with the
compressed-
air pistol)
Part no.
9047 000011
9047 000012
9047 000013
9047 000014
Interval
8 operating
hours
8 operating
hours
51
Advertisement
Table of Contents
