Home Leave Operation - Daikin FTXS09DVJU Service Manual

SiUS04-702
1.9

HOME LEAVE Operation

Outline In order to respond to the customer's need for immediate heating and cooling of the room after
returning home or for house care, a measure to switch the temperature and air volume from that for
normal time over to outing time by one touch is provided. (This function responds also to the need
for keeping up with weak cooling or heating.)
This time, we seek for simplicity of operation by providing the special temperature and air volume
control for outing to be set by the exclusive button.
Detail of the 1. Start of Function
The function starts when the [HOME LEAVE] button is pressed in cooling mode or heating mode
Control
(including stopping and powerful operation). If this button is pressed while the operation is stopped,
the function becomes effective when the operation is started. If this button is pressed in powerful
operation, the powerful operation is reset and this function becomes effective.
2. Details of Function
A mark representing [HOME LEAVE] is indicated on the liquid crystal display of the remote
controller. The indoor unit is operated according to the set temperature and air volume for HOME
LEAVE which were pre-set in the memory of the remote controller.
The LED (Red) of indoor unit representing [HOME LEAVE] lights up. (It goes out when the
operation is stopped.)
3. End of Function
The function ends when the [HOME LEAVE] button is pressed again during [HOME LEAVE]
operation or when the powerful operation button is pressed.
Others The set temperature and set air volume are memorized in the remote controller. When the remote
controller is reset due to replacement of battery, it is necessary to set the temperature and air
volume again for [HOME LEAVE].
Function and Control
The [HOME LEAVE] button is ineffective in dry mode and fan mode.
Main Functions
29