Econo Operation; Home Leave Operation - Daikin MKS-T Series Service Manual

Wall Mounted and LSP Duct Type Functions
1.9

ECONO Operation

Applicable
CTKS25/35/50/60/71TVMG
CTKB25/35/50/60TVMG
Models
Outline
ECONO operation reduces the maximum operating current and the power consumption.
This operation is particularly convenient for energy-saving. It is also a major bonus when
breaker capacity does not allow the use of multiple electrical devices and air conditioners.
It can be easily activated by pressing Econo/Quiet button on the wireless remote controller.
Details
 When this function is activated, the maximum capacity also decreases.
 The remote controller can send the ECONO command when the unit is in cooling or dry
 This function and POWERFUL operation cannot be used at the same time. The latest

1.10 HOME LEAVE Operation

Applicable
FDKS25/35EAVMB
FDKS25/35CAVMB
Models
FDKS50/60CVMB
Outline
HOME LEAVE operation is a function that allows you to record your preferred set temperature
and airflow rate. You can start your preferred operation mode simply by pressing HOME LEAVE
button on the remote controller.
Details 1. Function Start
2. Function Details
51
operation. This function can only be set when the unit is running. To cancel the ECONO
operation, press Econo/Quiet button several times until the ECONO symbol disappears.
command has the priority.
Power
consumption
and current

ECONO operation

The function starts when HOME LEAVE button is pressed in cooling operation (including
POWERFUL operation), or while the operation is stopped. If HOME LEAVE button is
pressed in POWERFUL operation, the POWERFUL operation is canceled and the HOME
LEAVE function becomes effective.
 HOME LEAVE button is ineffective in dry operation and fan operation.
A mark representing HOME LEAVE is indicated on the display of the remote controller. The
indoor unit is operated according to the set temperature and airflow rate for HOME LEAVE
which were recorded in the memory of the remote controller.
The LED (red) of indoor unit representing HOME LEAVE lights up. It goes out when the
operation is stopped.
Maximum during normal operation
Normal operation
Maximum during ECONO operation
Time
SiSG121917E
(R22012)
Part 4 Functions and Control