Condenser; Figure 3-5 Cm-3 With Chassis Mounted Grill In A Cut-A-Way Chassis; Figure 3-6 Cm-5 Installation Drawing; Cm-5 Condenser - Carrier Transport Air Conditioning Installation Procedures Manual

Figure 3-5 CM-3 With Chassis Mounted Grill In A Cut-A-Way Chassis

3.4 CM-5 CONDENSER

The Carrier Transport
Condenser is designed to be installed in the skirt of the
bus.
To install the CM-5 Condenser utilize the installation
procedures found in paragraph 3.3.
MOUNTING HARDWARE
SUPPLIED BY INSTALLER
MOUNTING HARDWARE
SUPPLIED BY INSTALLER
NOTE: MINIMUM HARDWARE REQUIRED
CM-5 (10) 3/8-16 GRADE 5 BOLTS
Chassis Mounted Grill
Air Conditioning
ALTERNATE MOUNTING
FLOOR
SPACER

Figure 3-6 CM-5 Installation Drawing

Refer to the installation drawing enclosed with the
condenser or see Figure 3-6.
CM-5
Because of the size and weight of the CM-5
condenser assembly, ten (10) bolts are re-
quired to safely install it to the bus floor string-
ers, Five (5) in the front and (5) in the rear.
3--5
Note
CM-5 CONDENSER
GRILL (3)
SKIRT
POP RIVET, 3/16" STEEL
OR SELF DRILLING SCREWS
T--311