Pre-Installation Inspection - Carrier Transport Air Conditioning Installation Procedures Manual

1.8 PRE-INSTALLATION INSPECTION

Immediately upon receipt of your Carrier Transport Air
Conditioning system:
Check the number/amount of cartons and skids/pallets
against the shipping company's "Bill of Lading" (B.O.L.).
Inspect all shipping cartons for any evidence of damage
in transit. If visible damage exists, indicate on "Bill of
lading" and initiate a claim directly with the transporting
company. All instances of visible damage or missing
cartons are the responsibility of the transporting
company.
Unpack and check components for hidden damage. If
hidden damage exists, initiate a claim directly with the
transporting company. All instances of hidden damage
are also the responsibility of the transporting company.
Check contents of cartons against the enclosed packing
lists. If any parts are missing, incomplete, or defective,
call Carrier Transport Air Conditioning customer service
for assistance.
Before installing any evaporator assembly, spin the
blower wheels by hand to insure they turn freely. It is
possible they could have been knocked out of alignment
during transit. This would be easy to correct before
installing.
Before attempting to install any evaporator or
condenser always insure that each component
will fit in the location of choice.
1--9
Note
T--311