Figure 2-19 Rear Mount Evaporator (Gen-5) - Installed; Figure 2-20 Em-6 (Gen 4) Rear Mounted In An Extended Roof Van; Luggage Compartment Evaporator - Carrier Transport Air Conditioning Installation Procedures Manual

Figure 2-20 EM-6 (GEN 4) Rear Mounted In An Extended Roof Van

NOTE
If at all possible, always cover or conceal hoses,
harnesses and drain lines. If not possible or fea-
sible. discuss with vehicle owner before contin-
uing with installation.

2.2.2 Luggage Compartment Evaporator

If installing an evaporator assembly in an enclosure
such as a rear luggage compartment, you must insure
Change 07/09

Figure 2-19 Rear Mount Evaporator (GEN-5) - Installed

there is sufficient passenger compartment air returned
to the evaporator assembly. The normal ratio of return
air in to evaporator air out is 2 to 1. The return air vents
must be high enough so there is no interference with the
return air flow.
Example: If there is 60 square inches of cooling vents,
you must have at least 120 square inches of return air
vents cut into the luggage compartment wall. If
assistance is needed, please contact the Carrier
Transport Air Conditioning Technical Service Hot Line
(1--800-450-2211).
2--7
T--311