Figure 2-35 Em-17 Installed; Em-17 Evaporator - Carrier Transport Air Conditioning Installation Procedures Manual

2.5 EM-17 EVAPORATOR

The EM-17 is available in single and dual loop
applications. Due to the weight and size of the
evaporator assembly it is recommended that this type
evaporator and accompanying condenser and electrical
controls be installed only by OEM's (Original Equipment
Manufacturers).
Reinforced mounting channels must be welded to the
bus roof bows in order to support the evaporator
assembly. An example of this application can be seen in
Figure 2-35.
Before attempting to install this type system, it is
strongly advised that you contact Carrier Transport Air
Conditioning Technical Service Hot Line for assistance
(1-800-450-2211).

Figure 2-35 EM-17 Installed

2--15
T--311