Figure 2-37 In-Wall Cut-Out (Panel Removed); Figure 2-38 In-Wall Cut-Out (Insulation Removed); Figure 2-39 In-Wall Cut-Out (Wires Supported) - Carrier Transport Air Conditioning Installation Procedures Manual

When installing any IW unit, be careful not to cut the bus structure rails or wiring harnesses.
Left Structure Rail
e Carefully remove the insulation from between the
walls. Nothing should interfear with the In-Wall

Figure 2-37 In-Wall Cut-Out (Panel Removed)

CAUTION

Figure 2-38 In-Wall Cut-Out (Insulation Removed)

Bracket To Hold Wiring Up

Figure 2-39 In-Wall Cut-Out (Wires Supported)

2--17
Right Structure Rail
evaporator. Move the wiring to the top of the cut-out and
support in place (See Figure 2-39).
T--311