Figure 2-49 Front In-Wall Template; Figure 2-50 Hose/Harness/Drain Line Routing & Access Cut-Out; Figure 2-51 In-Wall Front Installation; Front Mounted In-Wall Evaporator - Carrier Transport Air Conditioning Installation Procedures Manual

2.6.2 Front Mounted In-Wall Evaporator

Installation of an In-Wall in the front wall of a bus
requires a little more thought and planing than when
installing a rear mounted IW. These could include, but
would not be limited to:
Figure 2-50 Hose/Harness/Drain Line Routing & Access Cut-Out
Cut-Out Too High
Fitting Access Hole
1 The safest and least intrusive way to route refrigerant
2 How and where to route drain lines.
3 Drivers visibality not impaired.

Figure 2-49 Front In-Wall Template

Ground Location Moved
Access Cut-Out
Serial/Model Data Tag

Figure 2-51 In-Wall Front Installation

2--21
hose and electrical cable
T--311