Start Sansurfer Switch Manager - Qlogic SANbox 5602 Installation Manual

4 – Installation
Installing a Switch
10. To ensure that you are using the most recent version of SANsurfer Switch
Manager, visit the QLogic support web page and go to
Manuals.
a.
b.
11. Open the tar file and save the
SANsurferSwitchMgr_QLGCsol_5.00.xx.bin file in a folder and make the
file executable.
12. Install the new SANsurfer Switch Manager package:
13. Change directories to the package location:
14. Locate and execute the file sbm_over_sms.sh:
15. When prompted for the SMS installation directory, enter d if SMS was
installed in it's default directory (/opt/QLogic_Corporation/SANsurfer).
Otherwise, enter the path name for the SMS installation directory. The script
will copy the necessary files to the specified installation directory.
16. Start SANsurfer Switch Manager from SANsurfer Management suite as you
did in
4.2.6

Start SANsurfer Switch Manager

You can start SANsurfer Switch Manager as a standalone application or from
SANsurfer Management Suite.
Note:
4-16
Select your switch model from the pull-down menu. Locate the
description for SANsurfer Switch Manager for Linux under
"Management Software".
If the release version number (5.00.xx) is greater than what is currently
installed on your workstation, down load the new version. Otherwise,
no upgrade is needed.
# chmod +x sansurferswitchmgr_QLGCsol_5.00.xx
# pkgadd -d sansurferswitchmgr_QLGCsol_5.00.xx
# cd /usr/opt/QLGCsol/bin
# ./sbm_over_sms.sh
step 9 and confirm that the new version is running.
After the switch is operational, you can also open the SANsurfer
Switch Manager web applet, by entering the switch IP address in an
internet browser. If your workstation does not have the Java 2 Run
Time Environment program, you will be prompted to download it.
0
Drivers, Software and
59096-01 A