Qlogic SANbox 5602 Installation Manual page 215

0
Whoami
Zoneset (Active, List)
Zoning (History, Limits, List)
switch
Displays switch operational
operational parameters.
SymbolicName
SwitchWWN
SwitchType
BootVersion
CreditPool
DomainID
FirstPortAddress
FlashSize - MBytes
LogLevel
MaxPorts
NumberOfResets
ReasonForLastReset
ActiveImageVersion - build date
PendingImageVersion - build date
ActiveConfiguration
AdminState
AdminModeActive
59096-01 A
information.Table B-28
Table B-28. Switch Operational Parameters
Parameter
B – Command Line Interface
describes the switch
Description
Descriptive name for the switch
Switch world wide name
Switch model
PROM boot version
Number of port buffer credits available
to recipient ports
Switch domain ID
FC address of switch port 0
Size of the flash memory in megabytes
Event severity level used to record
events in the event log
Number of ports available on the switch
Number of times the switch has been
reset over its service life
Action that caused the last reset
Active firmware image version and build
date.
Firmware image version and build date
that is pending. This image will become
active at the next reset or power cycle.
Name of the switch configuration that is
in use.
Switch administrative state
Admin session status
Show Command
B-97