B – Command Line Interface
Ping Command
Ping Command
Initiates an attempt to communicate with another switch over an Ethernet network
and reports the result.
Authority
None
Syntax
ping [ip_address]
Keywords
[ip_address]
The IP address of the switch to query. Broadcast IP addresses, such as
255.255.255.255, are not valid.
Examples
The following is an example of a successful Ping command:
SANbox #> ping 10.20.11.57
Ping command issued. Waiting for response...
SANbox #>
Response successfully received from 10.20.11.57.
This following is an example of an unsuccessful Ping command:
SANbox #> ping 10.20.10.100
Ping command issued. Waiting for response...
No response from 10.20.10.100. Unreachable.
B-42
0
59096-01 A