Qlogic SANbox 5602 Installation Manual page 182

B – Command Line Interface
Set Config Command
Parameter
IOStreamGuard
PDISCPingEnable
(1-Gbps/2-Gbps
ports only)
security
Initiates an editing session in which to change the security settings. The system
displays each parameter one line at a time and prompts you for a value. For each
parameter, enter a new value or press the Enter key to accept the current value
shown in brackets. Enter "q" or "Q" to end the editing session.
describes the Set Config Security parameters.
AutoSave
FabricBindingEnabled
switch
Initiates an editing session in which to change switch configuration settings. The
system displays each parameter one line at a time and prompts you for a value.
For each parameter, enter a new value or press the Enter key to accept the
current value shown in brackets.
parameters.
B-64
Table B-18. Set Config Port Parameters (Continued)
I/O Stream Guard. Enables or disables the suppression of
RSCN messages. IOStreamGuard can have the following
values:
Enable – Suppresses the reception of RSCN
messages from other ports for which IOStreamGuard
is enabled.
Disable – Allows free transmission and reception of
RSCN messages.
Auto – Suppresses the reception of RSCN messages
when the port is connected to an initiator device with a
QLogic HBA. For older QLogic HBAs, such as the
QLA2200, the DeviceScanEnabled parameter must
also be enabled. The default is Auto.
Enables (True) or disables (False) the transmission of ping
messages from the switch to all devices on a loop port.
The default is True.
Table B-19. Security Configuration Parameters
Parameter
Enables (True) or disables (False) the saving of
changes to active security set in the switch's
permanent memory. The default is True.
Enables (True) or disables (False) the configuration
and enforcement of fabric binding on all switches the
fabric. Fabric binding associates switch worldwide
names with a domain ID in the creation of ISL groups.
Description
Description
Table B-20 describes the Set Config Switch
0
Table B-19
59096-01 A