This section describes how to install and configure the SANbox 5602 switch. It
also describes how to load new firmware and how to recover a disabled switch.
4.1
Site Requirements
Consider the following items when installing a SANbox 5602 switch:
4.1.1
Fabric Management Workstation
The requirements for fabric management workstations running SANsurfer Switch
Manager are described in
Operating System
Memory
Disk Space
Processor
Hardware
Internet Browser
Telnet workstations require an RJ-45 Ethernet port or an RS-232 serial port and
an operating system with a Telnet client.
59096-01 A
Installation
Fabric Management Workstation
Switch Power Requirements
Environmental Conditions
Table 4-1. Management Workstation Requirements
Windows 2000/2003/XP
Solaris 8/9/10
Linux® Red Hat® EL 3.x
S.u.S.E® Linux 9.0 Enterprise
Mac® OS X 10.3
256 MB or more
150 MB per installation
500 MHz or faster
CD-ROM drive,
Microsoft® Internet Explorer® 5.0 and later
Netscape Navigator® 4.72 and later
Mozilla™ 1.02 and later
Safari®
Java 2 Runtime Environment to support web applet
Section 4
Table
4-1:
RJ-45
Ethernet port, RS-232 serial port (optional)
4-1