Table of Contents
Advertisement
D
4.2.9
SANbox2 Installation Disk - Windows Installation
To install the SANbox Manager application on Windows from the SANbox2
Installation Disk, do the following:
1.
Close all programs currently running, and insert the SANbox2 Installation
Disk into the management workstation CD-ROM drive.
2.
Using Windows Explorer, double-click the drive letter which contains the
SANbox2 Installation Disk.
3.
Double click the SANbox_Manager folder, then double click the Windows
folder.
4.
Double click the executable file and follow the SANbox Manager installation
instructions.
4.2.10
SANbox2 Installation Disk - Linux Installation
To install the SANbox Manager application on Linux from the SANbox2 Installation
Disk, do the following:
1.
Close all programs currently running, and insert the SANbox2 Installation
Disk into the management workstation CD-ROM drive.
2.
Open the File Manager and double-click on the CD-ROM icon.
3.
Double click the SANbox_Manager folder, then double click the Linux folder.
4.
Double click the executable file and follow the SANbox Manager installation
instructions.
4.2.11
SANbox2 Installation Disk - Solaris Installation
To install the SANbox Manager application on Solaris from the SANbox2
Installation Disk, do the following:
1.
Close all programs currently running, and insert the SANbox2 Installation
Disk into the management workstation CD-ROM drive.
2.
Open a terminal window. If the disk isn't already mounted, enter the
following command:
3.
Move the directory on the disk that contains the executable. Enter the
following command:
4.
Run the executable and follow the SANbox Manager installation instructions.
Enter the following command:
59042-03 A
mount /mnt/cdrom
cd cdrom/cdrom0/sanbox~1/solaris
pkgadd -d sol_pkg
4 – Installation
Installing a Switch
4-13
Advertisement
Table of Contents
