Assembling The Wire Saddle For The Eps Cord - Brocade Communications Systems ICX 6430 Hardware Installation Manual

Assembling the wire saddle for the EPS cord

5.
Assembling the wire saddle for the EPS cord
The wire saddle for the EPS cord is used to hold the EPS cord securely in place when connecting to
multiple devices. This is an optional installation that will help to prevent the EPS cord from accidentally
unplugging and losing connection with the external power receptacle. Assemble the wire saddle on
both ends of the EPS cord.
Complete the following steps to assemble the wire saddle for the EPS cord.
1.
56
1 Rack-mounting screws
2 Cage nuts
FIGURE 45 Installing the external power supply in a rack
If installing multiple external power supplies, mount them in the rack one below the other.
Using a Phillips screwdriver, remove the two screws on the EPS faceplate of the external power
receptacle, as illustrated in the figure below.
Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide
53-1003079-01