Brocade Communications Systems ICX 6430 Hardware Installation Manual page 20

ICX6430 and ICX 6450 Overview
TABLE 2
LED
Ethernet
(1 - 24/48)
PoE/PoE+(1~24/48)
SFP/SFP+(X1 - X4) for ICX 6450
devices
SFP(F1 - F4) for ICX 6430 devices
Out-of-band management port (2
LEDs)
18
Port status LEDs
Condition
On/Flashing Green
Off
On/Green
Off
On/Flashing Green
On/Flashing Yellow
Off
On/ Flashing Green
Off
Off (both LEDs)
On/Flashing (left side)
On/Green (right side)
Right LED off, left LED
on or flashing
Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide
Status
The port has established a valid link at 10, 100 or
1000 Mbps. Flashing indicates the port is
transmitting and receiving user packets.
A link is not established with a remote port.
The port is providing PoE or PoE+ power to a
connected device.
The port is not providing PoE or PoE+ power.
The SFP port is operating at 10 Gbps. Flashing
indicates the port is transmitting and receiving user
packets at 10 Gbps.
The SFP port is operating at 1 Gbps. Flashing
indicates the port is transmitting and receiving user
packets at 1 Gbps.
A link is not established with a remote port.
The SFP port is operating at 1 Gbps. Flashing
indicates the port is transmitting and receiving user
packets at 1 Gbps.
A link is not established with a remote port.
Offline
Link-up. Flashing indicates the port is transmitting
and receiving user packets.
1 Gbps Link-up
10/100 Mbps Link-up. Flashing indicates the port is
transmitting and receiving user packets.
53-1003079-01