Assembling The Wire Saddle For The Eps Cord - Brocade Communications Systems ICX 6430 Hardware Installation Manual

Installing the device
4. Use the four cage nuts to screw the device to the rack mount holes.
FIGURE 45 Installing the external power supply in a rack
1. Rack-mounting screws
2. Cage nuts
5. If installing multiple external power supplies, mount them in the rack one below the other.

Assembling the wire saddle for the EPS cord

The wire saddle for the EPS cord is used to hold the EPS cord securely in place when connecting to multiple devices. This is an optional
installation that will help to prevent the EPS cord from accidentally unplugging and losing connection with the external power receptacle.
Assemble the wire saddle on both ends of the EPS cord.
Complete the following steps to assemble the wire saddle for the EPS cord.
58
Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide
Part Number: 53-1003617-03