Bernina 56 User Manual page 24

56-82e_EN_ES_FR_PT_230807:07_55-90e_EN_ES_FR_PT.qxd
56 66
23.8.2007
80e 90e
16:12 Seite 26
Connecting machine to
GB EN
power source
Connect the machine to a power source as
illustrated.
Attention:
Unplug power cord when machine is not in
use.
Sewing light
Press main switch for power and light on.
("l")
Position 0 - Machine is switched off.
Postion 1 - Machine and sewing light is
switched on.
Foot control
Foot control regulates the sewing speed.
Attention:
Consult a qualified electrician if in doubt as to
connect machine to power source.Unplug
power cord when machine is not in use. The
appliance must be used with the foot
controller 4C-315A (100V), 4C-316B (110-
120V area) / 4C-326G (230V), 4C-326C (220/
240V area) manufactured by Panasonic Co.,
Ltd. (Taiwan).
IMPORTANT NOTICE
If the appliance has a polarized plug (one
blade is wider than the other). To reduce the
risk of electric shock, this plug will fit in a
polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified electrician. Do not modify the
plug in any way.
The optimal operation temperature for the
failure-free operation of this machine must
be 68°F +/- 50°F.