Bernina 56 User Manual page 122

56-82e_EN_ES_FR_PT_230807:07_55-90e_EN_ES_FR_PT.qxd
66
23.8.2007
82e
16:13 Seite 124
GB EN Maintenance
Caution:
Main switch on "0". Disconnect machine
from electricity supply before inserting or
removing any parts and before cleaning.
Cleaning
Remove the stitch plate
1. Raise the needle to its highest position.
Remove the presser foot. Open the
bobbin cover plate, remove the two
screws, then remove the stitch plate.
2. Press the bobbin holder toward to the
right, lift it up and remove it.
3. Clean the hook race.
4. Clean the feed dog and bobbin holder
with a brush, then clean them with a
soft, dry cloth.
5. Replace the bobbin holder into the
hook race so that the tip (A) fits to the
stopper (B). Replace the stitch plate and
the two screws. Insert the bobbin.
Close the bobbin cover plate, replace
the presser foot.
Important:
Fabric, fluff and threads must be removed
regulary. The drop-in system MUST NOT
be lubricated. Your machine should be
serviced at regular intervals at your local
dealer.