Bernina 56 User Manual page 110

56-82e_EN_ES_FR_PT_230807:07_55-90e_EN_ES_FR_PT.qxd
56 66
23.8.2007
82e
16:12 Seite 112
GB EN Quilting
1/4" Quilting foot available as optional
accessorie
Set stitch length control between
"2" - "4".
Pattern selector on " ".
Center needle position.
Procedure:
Seam allowance 1/4 inch (6 mm)
Place the fabric under the presser foot so
that the raw edges are aligned with the
seam guide sew seam by guiding the fabric
along the guide so that perfect 1/4 inch
seams are stitched.
Seam allowance 1/8 inch (3 mm)
Position the fabric under the foot raw
edges aligned with the outer edge of the
right toe (see arrow). Stitch perfect 1/8 inch
seams.
The notches on the left edge of the foot
are 1/4 inch in front and behind the needle
located. The centre notch is in line with the
point of needle penetration. The markings
are helpful when the patchwork seam
should start or end 1/4 inch in from the
fabric edge.
Caution:
This foot can only be used with straight
stitch in centre position.