Standard Sewing Functions - Bernina 56 User Manual

56-82e_EN_ES_FR_PT_230807:07_55-90e_EN_ES_FR_PT.qxd
56 66
23.8.2007
82e
16:12 Seite 76
GB EN Sewing on buttons
Move the drop feed control to right side to
lower the feed dogs. (1)
Change presser foot to button sewing foot.
Turn the stitch length dial to "0".
Position the work under the foot. Place the
button in the desired position, lower the
foot. Set the pattern selector knob on zig
zag stitch. Adjust the stitch width between
"3" - "5"(model 56), "3" - "7"(model
66/82e) according to the distance between
the two holes of the button. Turn the
handwheel to check that the needle goes
cleanly into the left and right holes of the
button. Set the pattern selector knob on
straight stitch, and sew a few securing
stitches. Set the pattern selector knob on
zig zag stitch, and slowly sew on the
button with about 10 stitches. Set the
pattern selector knob on straight stitch,
and sew a few securing stitches.
If a shank is required, place a darning
needle on top of the button and sew. (3)
For buttons with 4 holes, sew through the
front two holes first (2), push work forward
and then sew through the back two holes
(3).
Move the drop feed control to left side for
normal use.