Scan Operation; Scan On/Off - Ericsson KME-200 Operator's Manual

SCAN OPERATION

The KME- mobile radio can be set up to scan (Monitor) up to 16
channels on the selected system. The scanned channels may be any
frequency within the frequency band limits of the radio. If the radio
picks up activity on one of the scanned channels, the radio will switch to
the channel and allow the user to receive the call. When the call is done,
the radio automatically switches back to the knob-selected channel.
When scan is turned ON, the radio scans all the channels in the scan list.
Initially, the scan list is created when the radio is PC Programmed, but
the KME radio allows the user to modify the scan list.
The scan list can also include a priority 1 channel and a priority 2
channel. In scan mode, channels defined as priority channels have
precedence over non-priority channels. If a call on a priority 2 channel is
received, the radio will drop a call while on a non-priority channel and
switch to the priority channel to receive the call. If a call on a priority 1
channel is received, the radio will drop a call while on a non-priority
channel or a priority 2 channel and then switch to the priority 1 channel
to receive the call. Priority channels are also scanned more often than
non-priority channels.
The following sections describe how to use the scan feature on the
KME- mobile radio.

SCAN ON/OFF

1. To turn the scan feature ON, press the SCAN button.
2. The SCAN icon should appear in the radio display.
3. To turn the scan feature OFF, press the SCAN button
again.
4. The SCAN icon should disappear from the radio
display.
20