Getting To Know The Gm330-Bff - DFI GM330-BFF User Manual

Getting to Know the GM330-BFF

Front View
Power LED
HDD LED
Power Button
4-pin DC-in
Reset Button
LAN 1 LAN 2
COM 4/5 RS232
(Tx/Rx/12V/-12V/GND)
COM 3 RS232
(Tx/Rx/GND) or ccTalk
COM 2 (RS232)
COM 1
(RS232/RS422/RS485)
Speaker
5.1 ch audio
Door 1~6
USB Ports
iButton
(from top to down):
S/PDIF
USB 2_4
USB2_5
USB 2_3
USB 2_2
USB 2_1
USB 3_2
Chapter 1 Introduction
DP 0
DP 1
Door 7
Digital inputs/outputs
(from top to down):
Digital input 1~16
Digital input 17~32
Digital output 1~16
Digital output 17~32
Chapter 1
Speaker and 5.1 ch audio
Connects an audio I/O module to the 4-pin speaker connector for stereo (4.5W+4.5W) speak-
ers and 5.1 ch audio connector for audio sound systems; there is also an S/PDIF digital audio
connector.
Digital I/O
32 digital inputs via 2x10 micro-fit connector
32 digital outputs via 2x9 micro-fit connector
LAN Ports
Connect the system to a local area network.
DC-in
DC 12V power input via a 4-pin connector.
DP Ports (DP 0&1)
Connect the DisplayPort of a display device.
USB 2.0 & 3.0 Ports
5 USB 2.0 ports and 2 USB 3.0 ports (one in the I/O area and the other in the system area
protected by a cover)
COM ports
COM1 (DB-9): connects RS232/RS422/RS485 devices.
COM2 (DB-9): connects RS232 devices.
COM3:
connects RS232 with Tx/Rx/GND or ccTalk
COM4/5: connects RS232 with Tx/Rx/+12V/-12V/GND
Power LED
Indicates the status of the system.
HDD LED
Indicates the status of the storage device.
Power Button
Press to power on or off the system.
Reset Button
Press to reset the system.
Intrusion Doors Connectors
6 doors via a 2x4 micro-fit connector
1 door via a 2-pin box header in the I/O area
1 door via a 2-pin box header in the protected system area
8