Exit; Updating The Bios; Notice: Bios Spi Rom - DFI VC230-AL User Manual

X Exit
Exit Saving Changes
Select this field and press <Enter> to exit BIOS setup and save your changes.
Load Optimal Defaults
Select this field and press <Enter> to load the optimal defaults.
Discard Changes
Select this field and press <Enter>to exit the BIOS setup without saving your changes.
Save Setting to file
Select this option to save BIOS configuration settings to a USB drive. The operation will fail if
there aren't any USB devices detected on the system. The saved configuration will have the
DSF file extension and can be used for restoration.
Restore Setting from file
Select this option to restore BIOS configuration settings from a USB drive. Note that this option
will not be available if there aren't any USB devices detected in the system.
User's Manual | VC230-AL
X Updating the BIOS
To update the BIOS, you will need the new BIOS file and a flash utility. Please contact technical
support or your sales representative for the files and specific instructions about how to update
BIOS with the flash utility. For updating Insyde BIOS in UEFI mode, you may refer to the how-to
video at https://www.dfi.com/tw/knowledge/video/31.
X Notice: BIOS SPI ROM
1. The Intel ® Management Engine has already been integrated into this system board. Due
to the safety concerns, the BIOS (SPI ROM) chip cannot be removed from this system
board and used on another system board of the same model.
2. The BIOS (SPI ROM) on this system board must be the original equipment from the fac-
tory and cannot be used to replace one which has been utilized on other system boards.
3. If you do not follow the methods above, the Intel
dated and will cease to be effective.
Note:
a. You can take advantage of flash tools to update the default configuration of the
BIOS (SPI ROM) to the latest version anytime.
b. When the BIOS IC needs to be replaced, you have to populate it properly onto
the system board after the EEPROM programmer has been burned and follow
the technical person's instructions to confirm that the MAC address should be
burned or not.
Chapter 3
BIOS SETTINGS
Management Engine will not be up-
®
39