Table of Contents
Advertisement
X Save & Exit
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Main
Advanced
Chipset
Security
Boot
Exit Saving Changes
Load Optimal Defaults
Discard Changes
Boot Override
Version 2.18.1263. Copyright (C) 2020 American Megatrends, Inc.
Exit Saving Changes
To save the changes, select this field and then press <Enter>. A dialog box will appear. Select
Yes to reset the system after saving all changes made.
Load Optimal Defaults
To restore and load the optimized default values, select this field and then press <Enter>. A dia-
log box will appear. Select Yes to restore the default values of all the setup options.
Discard Changes
To discard the changes, select this field and then press <Enter>. A dialog box will appear. Se-
lect Yes to reset the system setup without saving any changes.
Boot Override
Move the cursor to an available boot device and press Enter, and then the system will immedi-
ately boot from the selected boot device. The Boot Override function will only be effective for
the current boot. The "Boot Option Priorities" configured in the Boot menu will not be changed.
User's Manual | EC700-AL
Save & Exit
R e s e t t h e s y s t e m a f t e r
saving the changes
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F7: Popup Boot Device List
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
X Updating the BIOS
To update the BIOS, you will need the new BIOS file and a flash utility. Please contact technical
support or your sales representative for the files and specific instructions about how to update
BIOS with the flash utility. For updating AMI BIOS in UEFI mode, you may refer to the how-to
video at https://www.dfi.com/Knowledge/Video/5.
X Notice: BIOS SPI ROM
1. The Intel
®
Management Engine has already been integrated into this system board. Due
to the safety concerns, the BIOS (SPI ROM) chip cannot be removed from this system
board and used on another system board of the same model.
2. The BIOS (SPI ROM) on this system board must be the original equipment from the fac-
tory and cannot be used to replace one which has been utilized on other system boards.
3. If you do not follow the methods above, the Intel
dated and will cease to be effective.
Note:
a. You can take advantage of flash tools to update the default configuration of the
BIOS (SPI ROM) to the latest version anytime.
b. When the BIOS IC needs to be replaced, you have to populate it properly onto
the system board after the EEPROM programmer has been burned and follow
the technical person's instructions to confirm that the MAC address should be
burned or not.
Chapter 3
BIOS SETTINGS
Management Engine will not be up-
®
34
Advertisement
Table of Contents
