Front fog la mps
1. Remove 2 screws from panel on
underside of vehic le below front fog
la mps and rem ove panel.
2. Disconnect harness connector from bulb
holder and rotate bulb hold er anti-
cloc kwise.
3. Remove bulb holder from lamp
assem bly, rotate bulb anti-clock wise and
remove from bulb holder.
4. Install new bulb into bulb holder a nd
rotate it clockwise.
5. Reinstall bulb hold er in lamp assembly
and reconnect harness connector.
6. Reinstall panel to underside of vehicle
using 2 screws rem ov ed earlier.
Side repeater lam ps
1. Using a suita ble screwdriver, pry lam p
assembly away from wing.
2. Rotate bulb holder anti-clockwise.
3. Remove bulb from lamp assembly b y
pulling bulb straight out of bulb holder.
4. Install new b ulb into b ulb holder by
pressing it in and rotating the bulb
holder c lock wise.
5. Push lam p assembly back into ap erture.
Self-help, vehicle care
Rear brak e, tai l, turn signal, reverse lamp s
and fog tai l lamp
1. Open the tailgate and remove 2 sc rews
and lamp assem bly.
2. Remov e bulb holder by rotating it
anti-c lock wise.
3. Remov e bulb from bulb hold er by
pressing the bulb in and rotating it anti-
clockwise.
4. Install new bulb into bulb holder.
5. Reinsta ll bulb holder into lamp assem bly.
Rotate bulb holder clockwise and ensure
it is secure.
189