Opel Antara Owner's Manual page 167

Inserting the coupling ba ll bar
Insert the coupling b all bar into the
coupling housing and push firmly
downwards until the coupling ball b ar
audibly engages.
If it does not engage, repeat fitting
proced ure.
Do not swing the coupling ball b ar to the
left or right, or upwards and downwards, to
avoid disrupting correct fitting.
Lock coup ling ball bar by turning the
supplied key in the loc k cylinder of the
coupling b all bar.
Remove key.
Driving and o peration
I mporta nt
C heck tha t the coupling ball bar is correctly
attached:
z Green marking must be visible on lever.
z Coupling ball ba r must b e sea ted firmly
in coup ling housing.
C oupling b all bar must be locked and key
must be remov ed.
9
Warnin g
Tow ing a carav an/trailer is only
permitted with a p roperly attac hed
coup ling ba ll b ar. If the coupling ball bar
cannot be p roperly attached, consult a
workshop.
Eye for break awa y stopp ing cab le 3
In the case of ca ra vans/trailers with
brak es 3, attach the breakawa y stop ping
cab le to the ey e - not the coup ling ba ll b ar.
167