Special Tools - BMW 5251 Service Manual

240-2
/
~utomatic Transmission
This section covers maintenance and replacement of the
automatic transmission for E39 models.
Automatic transmission internal repairs are not covered.
Such repairs require special service equipment and knowl-
edge. If it is determined that transmission internal sewice is
required, consult an authorized BMW dealer about a factory
reconditioned unit or a transmission rebuild.
CAUTION-
ATF does not circulate unless the engine is running. When
towing an automatic transmission vehicle, use a flat bed truck
or raise the rear wheels off the ground.
Special tools
Some special tools are required for the removal and installa-
tion of an automatic transmission on the E39 BMW models.
While these tools are not absolutely necessary, they are es-
pecially helpful when dealing with the removal and replace-
ment of the torque converter.
4
Engine support bracket
(Tool No. BMW 00 0 200.00 0 208)
4
Transmission jack
(Tool No. BMW 00 2 030)
4
Engine support block (V-8 models)
11 7310
(Tool No. BMW 11
7 310)