Central Locking and ~ n t i - ~ h e e l
Door latch, removing and installing
-
Close window on subject door and open all other windows.
-
Disconnect battery negative (-) cable
CAUTION-
Prior to disconnecting the batterl: read the battery discon-
nection cautions given in 001 General Warnings and Cau-
tions.
-
Remove door trim panel. See 411 Doors.
-
Remove air bag. See 721 Airbag System (SRS).
-
Remove outer door handle. See Door handle (outer), re-
moving and installing.
<
Working inside door cavity, release loclting tabs (arrows)
and open protective cover.
Pull down on electrical harness connector (arrow) to re-
lease.
<
Working inside door cavity, next to outside door sltin:
Disconnect door lock cylinder Bowden cable from latch as-
sembly arm (A) and support (B).
Disconnect microswitch connector (arrow).