Outside Mirror Housing - BMW 5251 Service Manual

-.-
-
Exterior Trim, Bumpers
Outside mirror glass with automatic dip control,
replacing
4
Slide locking pin (arrow) right to release glass (A).
-
If equipped with heated mirrors: remove heating element har-
ness connectors from back of mirror glass.
4
Install mirror glass by placing glass on lugs (arrows) and turn
loclting pin until glass is locked in place.
Outside mirror housing, removing and
installing
-
Remove mirror glass as described above.
4
Compress plastic retainers (arrows)
NOTE-
The front mirror housing is retained by either three or four
clips, depending on model.