Dash Panel Support, Removing And Installing - BMW 5251 Service Manual

51 3-1 5
I
Interior Trim
Dash panel support, removing and
installing
-
Remove lower dash panel. See Lower dash panel assem-
bly, removing and installing.
-
Remove upper dash panel. See Upper dash assembly, re-
moving and installing.
-
Remove upper steering column fasteners. See 320 Steering
and Wheel Alignment.
4
Remove dash support fasteners (arrows).
Remove wire ties as necessary and remove support.
-
Installation is reverse of removal.
Rear parcel shelf, removing and installing
(models without rear HPS airbags)
WARNING-
On 1998 and later models, rear Head Protection System
(HPS) airbags may be installed (optional equipment). The
procedure given below does not covermodels with rear HPS
airbags. See721 Airbag System (SRS).
-
Remove C-pillar trim panels. See Rear window pillar trim
panel (C-pillar), removing and installing.
-
Remove rear seat backrest. See 520 Seats.
-
Rear parcel shelf removing:
Remove center headrest fasteners.
Remove seatbelt floor mounting fasteners.
Carefully pry out safety belt trim panels and feed seatbelt
through slots.
. . .
-
- . . . . . . . . .
Remove expansion rivets and slide pane fonvard to re-
move.
<
Remove expanson r:vets (arrows).
Remove vent panels (A).
Remove speafter pane s
(B).
Remove center head rest s-pporl fasteners (C).
Slioe parcel shelf forward lo remove.
-
lnsta lation s reverse of removal.