BMW 5251 Service Manual page 891

Interior ~ r i m l
4
Remove fastener (arrow) beneath trim cap.
Working from top carefully pull trim panel away from A-pil-
lar and pull up to remove.
-
Installation is reverse of removal.
If necessary replace defective or broken mounting clips.
Door post trim panel (B-pillar), removing and installing
4
Remove seat belt fastener (arrow) from seat frame.
-
Remove front and rear door sill trim panels.
-
Pull front and rear rubber door seal away from trim panel.
4
Carefully pull bottom of lower trim panel away from door post
to release clips.
Pull trim lower panel straight down (arrow) to remove.