Head Protection Airbag Components; Head Protection Airbag (Hps) - BMW 5251 Service Manual

721 -1 1
Airbag System (SRS)~
Front door airbag:
Remove airbag mounting bolts (arrows).
Disconnect electrical harness connector.
CAUTIOI\C
When removing andinstalling the airbag unit, pay attention to
the routing of the electrical harness to avoid kinks or breaks
in the wire.
Installation is reverse of removal,
Rear door airbag:
Detach electrical harness connector.
Remove mounting bolts and remove airbag from door.
-
Installation is reverse of removal.
Route electrical harnesses as they were before.
Use new wire ties as necessary.
Use new self-locking mounting bolts.
Tightening
torque
Side-impact airbag to door
8.5
Nm
(75
in-lb)
Head protection airbag
components
1. B-pillar deflection plate
2. Head protection airbag
3. Cable holder
4. Gas generator