Left Cylinder Head, Removing, M62 Engine - BMW 5251 Service Manual

11
3-61
Cylinder Head Removal and installation
I
Remove intake manifold fasteners (A).
Carefully lift intake manifold off engine while checking that all
hoses and harnesses have been disconnected.
Left cylinder head, removing, M62 engine
-
Remove intake manifold as described earlier
-
Remove left side exhaust manifold. See 180 Exhaust Sys-
tem.
-
Drain engine coolant, then remove viscous clutch cooling
fan. See 170 Radiator and Cooling System.
WARNING
-
Use extreme caution when draining and disposfng of eng~ne
coolant. Coolant is poisonous and lethal to humans andpets.
Pets are attracted to coolant because of its sweet smell and
taste. Seek med~cal attention immediately if coolant is ingest-
ed.
4
Remove coolant manifold mounting fasteners and carefully
remove manifold.
NOTE-
Engine shown removed from engine bay
4
Remove ignition coil fasteners and coils (noting location of
ground strap).
-
Remove spark plugs.