Radiator Grill. Removing And Installing; Headlight Housing Trim Panel - BMW 5251 Service Manual

Exterior Trim, Bumpers
1
Radiator grill, removing and installing
-
Open hood
4
Carefully pry out tab on lefl or right side of grill trim ring (A),
as well as tabs on bottom.
-
Push grill out through opening. Be careful of hood lever on
passengers side of grill.
-
Once grill is removed, pry remaining tabs
(B)
to separate in-
ner grill from chrome trim ring.
-
Before installation, assemble chrome trim ring and grill insert
securely. Replace components if tabs or catches are brolten
or missing.
-
Install grill and trim ring in appropriate location in hood. Press
on trim ring until grill snaps into place.
Headlight housing trim panel, removing
and installing
4
Open hood
-
Remove spray nozzle of vehicles equipped with headlight
cleaning systems. See 611 Wipers and Washers.
Release inner tab (arrow) support.
Swing trim out to release outer hook
point.
from fender mounting
Installation is reverse of removal