Front Suspension
4
Remove ABS pulse sensor mounting bolts (arrows) and pull
sensor from housing.
-
Detach stabilizer bar link from stabilizer bar.
4
6-cylinder models: Remove tie rod outer end nut. Use BMW
special tool 31 2 240 or equivalent to press tie rod end off
steering arm.
4
Mark installalion position of strut tube (arrow) at steering
knuckle pinch collar.
NOTE-
The strut tube installation position is marked on factory strut
tubes: L for left and R for right.
CAUTION-
Use paint, not a scribe tool, to mark location of strut tube.