Rear Window Anti-Trap Strip, Removing - BMW 5251 Service Manual

Door Windows
molding and
anti-trap strip
4
If replacing molding with new one, transfer mounting clips
and foam insulation as necessary.
1. Window frame molding
2.
Clip
3.
Door corner speaker cover
4. Foam insulation
-
After installation, recheck anti-trap protection.
Rear window anti-trap strip, removing
-
Remove rear door panel and vapor barrier as described in
411 Doors.
4
Remove window frame molding strip, peeling it off fixed win-
dow partition (arrows). Do not tear strip in area (A).
Disconnect electrical harness connector (arrow).
After installation, recheck anti-trap protection.