Installing The Lower Triple Clamp (Exc Eu/Aus, Xc-W) - KTM 125 ECX EU Owner's Manual

SERVICE WORK ON THE CHASSIS
Installing the lower triple clamp
10.13
2 0 0 2
1 0 0 1
(EXC EU/AUS, XC‑W)
x
–
Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
–
Check whether the top steering head seal
–
Push on protective ring
500151-10
–
Position the upper triple clamp with the steering.
–
Position the clutch line and wiring harness.
–
Mount screw
B00805-11
–
Position the fork legs.
Info
The upper milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws
B00809-10
–
Tighten screws
Guideline
Screw, bottom triple clamp
B00799-12
–
Tighten screw
Guideline
Screw, top steering head
B00810-10
p. 128)

.

but do not tighten yet.

toward the front.

.

.

is correctly positioned.
M8 15 Nm
(11.1 lbf ft)
M20x1.5 12 Nm (8.9 lbf ft)
49