Display Mode Speed/S1 (Stop Watch 1); Display Mode Speed/S2 (Stop Watch 2) - KTM 125 ECX EU Owner's Manual

CONTROLS

Display mode SPEED/S1 (stop watch 1)

5.31

Display mode SPEED/S2 (stop watch 2)

5.32
Table of functions
Display Press the button
Display mode SPEED/H
No function
(operating hours)
Display mode SPEED/CLK No function
(clock)
Display mode SPEED/LAP Starts or stops the
(lap time) clock.
Display mode No function
SPEED/ODO (odometer)
Display mode SPEED/TR1 No function
(trip master 1)
Display mode SPEED/TR2 Increases value of TR2.
(trip master 2)
Display mode SPEED/A1 No function
(average speed 1)
Display mode SPEED/A2 No function
(average speed 2)
Display mode SPEED/S1 No function
(stop watch 1)
Display mode SPEED/S2 Starts or stops S2.
(stop watch 2)
Table of conditions and menu activation
Display
Display mode SPEED/H (operating hours)
Display mode SPEED/CLK (clock)
–
Press the button
display.
S1 (stop watch 1) displays the journey time on the basis of TR1 and continues when an
impulse is received from the wheel speed sensor.
The calculation of this value starts with the first impulse of the wheel speed sensor and
ends 3 seconds after the last impulse.
Press the button
Press the button
Press the button
400327-01
for 3 - 5 seconds.
Press the button
briefly.
–
Press the button
display.
S2 (stop watch 2) is a manual stop watch.
If S2 is running in the background, the S2 display flashes in the speedometer display.
Press the button
Press the button
Press the button
for 3 - 5 seconds.
400328-01
Press the button
briefly.
. Press the button
No function
No function
Stops the current lap
time and saves it, and
the stop watch starts
the next lap.
No function
No function
Reduces value of TR2.
No function
No function
No function
No function
briefly and repeatedly until S1 appears at the top right of the
. No function
. No function
Displays of TR1, A1 and S1 are reset to 0.0.
Next display mode
briefly and repeatedly until S2 appears at the top right of the
. Starts or stops S2.
. No function
Displays of S2 and A2 are reset to 0.0.
Next display mode
. Press the button
5 seconds.
The display changes to
the Setup menu of the
speedometer functions.
The display changes to
the Setup menu of the
clock.
The stop watch and the
lap time are reset.
–
The TR1, A1 and S1 dis-
plays are reset to 0.0.
Deletes value of TR2.
The TR1, A1 and S1 dis-
plays are reset to 0.0.
–
Displays of TR1, A1 and
S1 are reset to 0.0.
Displays of S2 and A2
are reset to 0.0.
The motorcycle is
stationary.
for 3 - Press the button
briefly.
Next display mode
Next display mode
Next display mode
Next display mode
Next display mode
Next display mode
Next display mode
Next display mode
Next display mode
Next display mode
Menu can be acti-
vated
•
•
20