Display Mode Speed/Clk (Clock); Display Mode Speed/Lap (Lap Time); Display Mode Speed/Odo (Odometer); Display Mode Speed/Tr1 (Trip Master 1) - KTM 125 ECX EU Owner's Manual

CONTROLS

Display mode SPEED/CLK (clock)

5.24

Display mode SPEED/LAP (lap time)

5.25

Display mode SPEED/ODO (odometer)

5.26

Display mode SPEED/TR1 (trip master 1)

5.27
–
Press the button
the display.
The time is displayed in CLK display mode.
Press the button
Press the button
Press the button
for 3 - 5 seconds.
Press the button
400319-01
briefly.
–
Press the button
the display.
In the LAP display mode, up to 10 lap times can be timed with the stop watch.
Info
If the lap time continues after you press the button
already occupied.
Lap 10 must be timed with the button
Press the button
400320-01
Press the button
Press the button
for 3 - 5 seconds.
Press the button
briefly.
–
Press the button
the display.
The total distance traveled is displayed in the ODO display mode.
Press the button
Press the button
Press the button
for 3 - 5 seconds.
Press the button
400317-01 briefly.
–
Press the button
display.
TR1 (trip master 1) runs constantly and counts to 999.9.
You can use it to measure trips or the distance between refueling stops.
TR1 is coupled with A1 (average speed 1) and S1 (stop watch 1).
Info
If 999.9 is exceeded, the values of TR1, A1 and S1 are automatically reset to
0.0.
400323-01
Press the button
Press the button
Press the button
for 3 - 5 seconds.
Press the button
briefly.
briefly and repeatedly until CLK appears at the bottom right of
. No function
. No function
The display changes to the Setup menu of the clock.
Next display mode
briefly and repeatedly until LAP appears at the bottom right of
.
. Starts or stops the clock.
. Stops the current lap time and saves it, and the stop watch
starts the next lap.
The stop watch and the lap time are reset.
Next display mode
briefly and repeatedly until ODO appears at the bottom right of
. No function
. No function
–
Next display mode
briefly and repeatedly until TR1 appears at the top right of the
. No function
. No function
The TR1, A1 and S1 displays are reset to 0.0.
Next display mode
18
, 9 memory locations are