Display Mode Speed/Tr2 (Trip Master 2); Display Mode Speed/A1 (Average Speed 1); Display Mode Speed/A2 (Average Speed 2) - KTM 125 ECX EU Owner's Manual

CONTROLS

Display mode SPEED/TR2 (trip master 2)

5.28

Display mode SPEED/A1 (average speed 1)

5.29

Display mode SPEED/A2 (average speed 2)

5.30
–
Press the button
display.
TR2 (trip master 2) runs constantly and counts up to 999.9.
The displayed value can be set manually with the button
very practical function when riding using the road book.
Info
The TR2 value can also be corrected manually during the journey with the but-
ton and the button
If 999.9 is exceeded, the value of TR2 is automatically reset to 0.0.
400324-01
Press the button
Press the button
Press the button
for 3 - 5 seconds.
Press the button
briefly.
–
Press the button
display.
A1 (average speed 1) shows the average speed calculated on the basis of TR1 (trip mas-
ter 1) and S1 (stop watch 1).
The calculation of this value is activated by the first impulse of the wheel speed sensor
and ends 3 seconds after the last impulse.
Press the button
Press the button
Press the button
400325-01
for 3 - 5 seconds.
Press the button
briefly.
–
Press the button
display.
A2 (average speed 2) shows the average speed on the basis of the current speed if the
stop watch S2 (stop watch 2) is running.
Info
The displayed value can differ from the actual average speed if S2 was not
timed after the ride.
Press the button
400326-01
Press the button
Press the button
for 3 - 5 seconds.
Press the button
briefly.
briefly and repeatedly until TR2 appears at the top right of the
.
. Increases value of TR2.
. Reduces value of TR2.
Deletes value of TR2.
Next display mode
briefly and repeatedly until A1 appears at the top right of the
. No function
. No function
The TR1, A1 and S1 displays are reset to 0.0.
Next display mode
briefly and repeatedly until A2 appears at the top right of the
. No function
. No function
–
Next display mode
19
and the button . This is a