Table of Contents
Advertisement
Menu: Setting of services
Your telephone system provides the following services:
PPP data service
•
Dial in (configuring the telephone system via ISDN (internal or external).
These services are accessed via virtual extensions.
Please note: The phone number 99 is pre-set and cannot be modified.
Configuration
Similar to LAN, the configuration is performed via a web browser. To do this, it is ne-
cessary to set up a remote data transmission network on your PC. Select your ISDN.
Enter the following data for access to the system:
•
Call number: 99
•
User name: admin
•
Password: admin
The user names and passwords of individual subscribers are also permitted here: If
access to your telephone system from an external location is desired, it is necessary
to assign to the ISDN data service an MSN from one of your external S0 ports (alloca-
tion table: incoming external connections). External access to the telephone system
is then realised via this phone number.
In addition, it is possible to set the relevant rights for remote access individually for
each subscriber. After selecting the subscriber, you perform the configuration
through the 'Dial-up remote access' menu. The administrator generally does not have
authorisation rights for remote access. In this case, a subscriber's password must be
used.
External dial-in
First, you will have to unlock your telephone system for external dial-in (Call-
Through/Call-Back). For this purpose, enter the external MSNs that are to be used for
this dialling-in process. Subscribers who want to use Call-Through and/or Call-Back
must use these particular MSNs when dialling in.
Configuration menu: Subscriber
68
Advertisement
Table of Contents
