Setting The Call Waiting Function; Call Waiting Signal - TIPTEL 83 system Operating Instructions Manual

System settings

Setting the call waiting function

If you receive an incoming call while already holding a telephone conversation, you can deter-
mine, whether a signal (two short tones) shall be given for this call or not.
Press the  or  button to select
1.
"settings".
Press the  button
2.
Press the  or  button to select
3.
"system".
Press the  button.
4.
Press the  button.
5.
Press the  or  button to select
6.
"call waiting".
Press the  button.
7.
Press the  or  button.
8.
Press the  button.
9.
Every time you press the button, the display
switches between the available functions.
The display shows "appointments".
The display shows "system".
The display shows "ISDN".
The display shows "MSN".
The display shows "call waiting".
The display shows the current setting.
Every time you press the button, the display
switches between:
ON: You will hear a call waiting signal when
receiving an incoming call while hol-
ding a telephone conversation.
OFF: Should you receive an incoming call
while holding a telephone conversati-
on, this will not be indicated by a call
waiting signal.
The setting is stored.
30