Table of Contents
Advertisement
First start-up
This telephone system has been designed as a Plug & Play device, i.e. after connect-
ing the terminals, connecting the telephone system to the mains supply and switch-
ing on the power supply, the system is ready to use.
There is a difference between configuring the telephone system, e.g. by an adminis-
trator, and configuring by individual subscribers. The administrator defines subscrib-
ers by assigning call numbers. Using this call number or the user's name and a
password (e.g. set call forwarding), the subscriber can edit personal settings via a
browser. The administrator also defines the extensions for signalling and which ex-
ternal MSNs are available.
Your telephone system has the following factory default settings (the following list is
not complete and only gives the settings relating to the initial functional test):
•
External S0 configured for Euro-ISDN point-multipoint and PP connection (DSS1)
•
S0 Port 2 and 3 are configured to an internal S0 via hardware jumpers. The sub-
scribers (MSNs) 20 – 21 and 30 - 31 are preset.
•
The internal S0 is configured for the Euro ISDN multipoint interface.
Subscribers (MSNs) 40 – 41 are preset.
•
The analogue extensions 1 – 8 are assigned to subscribers 50 – 57.
•
All subscribers have international exchange authorisation.
•
Standard exchange connection with the digit
•
Charges are only displayed on ISDN terminals, not on analogue terminals.
•
The PIN is preset to 0000.
•
The Ethernet address is preset to 192.168.34.100.
•
The subnet mask is preset to 255.255.255.0.
•
The basic DHCP address is 192.168.34.100.
•
The username/password for the web-based configuration is admin/admin.
•
Note:
To enable full functionality of your ISDN terminal units you will have to
assign MSNs to them. For details on assigning those MSNs please
consult the User's Manual for your ISDN terminal units.
Installing the System
The tiptel.com 822XT can be mounted on the wall. The required distance between
screws is 200 mm.
First start-up
.
16
Advertisement
Table of Contents
